System Overview; System Connections; Connecting Controller And Junction Box; Connecting Junction Box And External Devices - Samsung SCC-3100A User Manual

System Overview

1. System Connections

1-1 Connecting Controller and Junction Box

1-2 Connecting Junction Box and External Devices

[SVR-1630 connection]
[SVR-1650/1640/950/1630/430/440 connection]
* RX+ and TX+ / RX- and TX- must be short-
circuited.
• All supported SPEED DOME functions can be controlled when the PTZ camera is
connected through the SVR-1650/1640/950.
• When connecting with an SVR-1630, only SPD series PTZ cameras can be employed.
• When controlling a PTZ camera via an SVR-1630 there is a delay, and the response may be slow.
• When controlling a PTZ camera with a sub-controller there is a delay, and the response may be slow.
SYSTEM CONTROLLER 8
[PTZ connection]
(SPD-3300/3000/2300,
SPD-2500/2200/1600)
* RX+=DATA+
RX- =DATA
User's Manual
System Overview
2. RS-485/422 Pin Layout (D_SUB_FEMALE)
3.RS-232C Pin Layout (D_SUB_MALE)

4. Junction Box DIP Switch

• RS-485 Termination ON
• RS-485 Termination OFF
SYSTEM CONTROLLER
• RS-422 Termination ON
• RS-422 Termination OFF
9 User's Manual