Directed Electronics 2102T Installation Manual page 13

Type 4 - PKE + 4x10/5x10
87
87a
86 85
30
(+) Starter Wire
Starter Disable:
This connection is
optional and ad-
ditional parts are
sold separately.
This toggle switch will
bypass the starter disable.
Refer to the
Antenna Location
and Installation Points
section on page 5 for
more information.
These wires are not required in D2D mode.
*Sold separately.
**Antenna & Antenna harness are sold with your Remote Starter kit.
***10-feet Antenna Cable is included in the PKE kit.
****Door sense: The polarity of the door sense in the vehicle will determine which wire to connect
from the PKE to the DIRECTED Remote Starter.
© 2012 Directed� All rights reserved�
(+) Ignition Output
(-) Door Sense Input****
(+) Brake Input
(+) Door Sense Input****
Connect these wires
to the vehicle.
(-) Horn Output: Red/White: 3
(+) Door Sense Input: White/Purple: 4****
(+) Brake Input: Purple/Black: 5
(-) Starter Kill Output: White/Black: 6
(-) Door Sense Input: Blue/White: 10****
Antenna (18 feet)
Antenna (12 feet)*
(Part# SANT-PKE12)
Antenna (8 feet)
(-) Ground: Black: 2
3 wires red
connector
(+) 12v: Red: 4
Not Used
Optional
RX: Blue: 1
D2D Y CABLE
*
Prog. Button
4 wires red
connector
13