Top Cover - HP Compaq 516 Maintenance And Service Manual

Removal and replacement procedures

Top cover

Description
Top cover (includes TouchPad on/off board and cable, TouchPad button board and cable, and
TouchPad board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard and switch cover (see
d. Speaker (see
e. Display assembly (see
Remove the top cover:
1. Turn the computer upside down with the front toward you.
2. Remove the six slotted Torx T8M2.5×8.0 screws 1 and the two Phillips PM2.0×2.0 broadhead screws 2 that
secure the top cover to the base enclosure.
4–32
"Battery" on page
"Hard drive" on page
"Optical drive" on page
"Keyboard and switch cover" on page
"Speaker" on page 4-24)
"Display assembly" on page
4-6).
4-8)
4-18)
4-25)
Spare part number
538446-001
4-20)
Maintenance and Service Guide