Manual Control - Line B - Danfoss C67 User Manual

Manual control -
line B
Shift to manual mode.
B
Choose the unit you want to control. The selected
unit symbol will blink.
Controlled units are switched
the relevant button is pushed.
The motorized actuator (gear motor /
damper)
closes
the relevant button is pushed. If pushed for more
than 3 seconds, the actuator continues to close or
open the valve.
The thermo actuator
activates
pushed. If pushed for more than 3 seconds, the
actuator continues to open the valve.
Check the activation direction of the actuator either by
looking at it or by feeling whether the temperature of the
actual pipe changes as expected.
This operation applies to both circuits, if available.
During manual operation, all control functions are deactivated.
Controlled units
1 1 2 2
ON ON
60
or opens
the valve as long as the
3
Controller mode
ON
3 0
OFF or ON when
the controlled unit as long as
19
button is
The grey
side of the
ECL Card