Honda 2007 Accord Coupe Owner's Manual page 270

Main Menu
Main Menu
JACKING POINT
9. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.
Table of Contents Table of Contents
WHEEL NUT WRENCH
10. Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground.
11. Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up.
EXTENSION
Changing a Flat Tire
CONTINUED
267