Honda 2007 Accord Coupe Owner's Manual page 252

Main Menu
Main Menu
7. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
8.
onto the bulb. Make sure it is on
all the way.
9. Turn on the headlights to test the
new bulb.
10.
On EX-V6 model with manual
transmission
(Driver's side)
Reinstall the air intake duct
securely.
Put the inner fender cover in place.
11.
Install and lock each holding clip
by pushing on the center.
Table of Contents Table of Contents
Replacing a Front Side Marker/
Parking/Turn Signal Light Bulb
1. To change the passenger's side
bulb, start the engine, turn the
steering wheel all the way to the
left, and turn off the engine. To
change the driver's side bulb, turn
the steering wheel to the right.
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
HOLDING CLIPS
3. Pull the inner fender cover away
from the fender and bumper.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Lights
CONTINUED
249