Honda 2007 Accord Coupe Owner's Manual page 146

Main Menu
Main Menu
You can also load a CD into an empty
position while a CD is playing by
pressing the appropriate side of a
preset bar. The system stops playing
the current CD and starts the
loading sequence. It plays the CD
just loaded.
You operate the CD changer with
the same controls used for the radio.
The numbers of the disc and track
playing are shown in the display.
To select a different disc, press the
appropriate side of a preset bar
(1 6) or use the preset 5
to select the previous disc or preset
(DISC ) to select the next disc in
sequence. If you select a loaded
position in the CD changer, the
system will try to load the CD in the
next available slot.
Table of Contents Table of Contents
To Change or Select Tracks
SEEK/SKIP
press and release
skips forward to the beginning of the
next track. Press and release
skip backward to the beginning of
the current track. Press it again to
skip to the beginning of the previous
track.
To move rapidly within a track, press
and hold
(DISC )
6
Each time you
, the system
to
or .
AM/FM/CD Changer
The scan function samples
SCAN
all the tracks on the selected disc in
the order they are recorded on the
CD. To activate it, press and release
the SCAN button. You will see SCAN
in the display. You will get a
second sampling of each track on the
selected CD. Press the SCAN button
again to get out of the system.
D-SCAN This function samples
the first track of each disc in the
order they are loaded in the CD
changer. To activate it, select D-
SCAN by pressing and holding the
SCAN button. You will see D-SCAN
in the display. You will get a
second sampling of the first track on
each CD. Press the SCAN button
again to get out of D-SCAN.
10
10
143