Formatting The Floppy Disk (Optional) - Yamaha Disklavier E3 Operation Manual

Formatting the Floppy Disk (Optional)

Select the floppy disk [FUNC.] "Format"
In the case of using the unformatted floppy disk on the floppy drive
(optional) or deleting the entire contents on the floppy disk, format the
floppy disk.
1
Connect the floppy drive (optional) to the USB port on the
control unit.
2
Insert a floppy disk to the floppy drive.
3
Select "Format" in the media function menu, then press
[ENTER].
=MEDIA MENU=
CopyAll Format
The Format screen appears.
4
Press [ENTER].
"OK?" flashes in the first line of the screen.
5
Press [+/YES] to format, [–/NO] to cancel.
=Format=
Executing...
After a while, the completion message appears.
Press any button to return to the media selection screen.
=Format= ENT
Media=FD
=Format= OK? YES/NO
Media=FD
=Format=
Completed.
Press any button.
Media Management
Important:
Formatting a floppy disk erases all
data that stored in the disk, so make
sure that the disk you are going to
format does not contain the data you
want to keep.

To select a medium, see Chapter 3
"Basic Song Playback – Selecting
Medium and Their Contents" on
page 17.
Note:
If you are formatting a floppy disk,
make sure that the floppy disk's
erasure protection tab is set to
"unprotected."
ANY
Chapter
8
89