ZyXEL Communications GS3700 Series User Manual page 329

Click IP Application, VRRP and click the Configuration link to display the VRRP Configuration
screen as shown next.
Note: You can only configure VRRP on interfaces with unique VLAN IDs.
Note: Routing domains with the same VLAN ID are not displayed in the table indicated.
Figure 221 IP Application > VRRP Configuration: IP Interface
The following table describes the labels in this screen.
Table 176 IP Application > VRRP Configuration: IP Interface
LABEL DESCRIPTION
Index This field displays the index number of an entry.
Network This field displays the IP address and number of subnet mask bit of an IP domain.
Authentication Select None to disable authentication. This is the default setting.
Select Simple to use a simple password to authenticate VRRP packet exchanges on this
interface.
Key When you select Simple in the Authentication field, enter a password key (up to eight
printable ASCII character long) in this field.
Chapter 39 VRRP
GS3700/XGS3700 Series User's Guide
329