IBM TotalStorage DS4100 Installation, User's, And Maintenance Manual page 75

2. Use the correct host adapter driver. For the latest supported host adapters and
drivers, go to the following Web site:
www.ibm.com/servers/storage/disk/
Attach fiber-optic interface cables to each host adapter. You will connect the other
end of the cables to the controller later in the installation process. For more
information about handling fiber-optic cables, see "Handling fiber-optic cables" on
page 45.
Note: Do not install the DS4000 Storage Manager client at this time, if it is not
already installed. Install the storage server completely before you install the
software because you cannot test the software installation until the hardware
is connected.
Chapter 2. Installing the storage server
43