Pwr Button; Front Panel - Vertex Standard EVX-5300 Operating Manual

c
ontrols

Front Panel

Important! - All buttons located on the Front Panel are Programmable Function
( PF ) keys, configured according to your network requirements and programmed
by your Vertex Standard dealer. The instructions below describe a typically-config-
ured radio.
 
 
PWR ( ) Button

Press and hold in this button for 2 seconds to toggle the transceiver's power
"on" and "off".
 VOL Knob
Turn this control clockwise to increase the volume.
 Microphone Jack
Connect the microphone plug to this jack.
 TX/BUSY Indicator
Indicates transceiver's Transmit/Receive Status.
[ P1 ] - [ P4 ] Keys ( Programmable Function Keys )

These keys can be set up for special applications, such as High/Low power
selection, Monitor, Talk-Around, etc., as determined by your network require-
ments and programmed by your Vertex Standard dealer.
[  ] / [  ] Keys ( Programmable Function Keys )

In the factory default, pressing either key changes the current channel.
4
& c
onnEctors
 

EVX-5300/-5400 O
( EVx-5300 )

pErating
M
anual