Confirm That Sound Can Be Heard - Roland Duo-Capture UA-11 Owner's Manual

Driver Installation

Confirm that Sound can be Heard

Windows
1. Connect the headphones or speakers as shown
in the figure .
* To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and
turn off the power on all devices before making any
connections .
2. Open the folder named [Sample] on the
included CD-ROM, and copy the file "TTears"
( .mp3) to the desktop .
3. Double-click the file "TTears" ( .mp3) that you
copied to the desktop .
Windows
Windows Media Player starts.
Mac OS X
iTunes starts.
Click the playback button to play the sample file.
The software that starts and is used to play the sample file may vary depending on your
computer environment. If different software starts, play the sample file as described in the
owner's manual for the software you are using.
4. Adjust the volume .
Use the DUO-CAPTURE's [OUTPUT VOLUME] slider to adjust the volume.
If the sample file can be heard, the computer and DUO-CAPTURE are connected properly and
the driver has been successfully installed.
If you cannot hear the sample file, refer to "Using the DUO-CAPTURE" (p. 20).
* Use of the demo song supplied with this product for any purpose other than private,
personal enjoyment without the permission of the copyright holder is prohibited by law .
Additionally, this data must not be copied, nor used in a secondary copyrighted work
without the permission of the copyright holder .
14
Mac OS X