Roland Duo-Capture UA-11 Owner's Manual page 12

Driver Installation
Windows XP
9. If a dialog box that asks whether you
want to connect to Windows Update
appears, select [No, not this time] and
click [Next] .
10. Select [Install the software automatically
(Recommended)] and click [Next] .
11. If the "Hardware Installation" dialog box
appears, click [Continue Anyway] to proceed
with the installation .
12. When "Completing the Found New Hardware
Wizard" appears, click [Finish] .
13. When "Installation has been completed . " appears,
click [Close] to close the "DUO-CAPTURE Driver
Setup" dialog box .
If the "Change System Settings" dialog box appears, click [Yes] to restart Windows.
14. Open the "Control Panel," click [Sounds, Speech, and Audio Devices], and
then click [Sounds and Audio Devices] .
If you have selected Classic view, double-click [Sounds and Audio Devices].
15. Click the [Audio] tab and select [OUT (DUO-CAPTURE)] in the [Sound
playback] area .
16. Click [OK] .
If you cannot select the DUO-CAPTURE, refer to "Using the DUO-CAPTURE" (p. 20).
If the DUO-CAPTURE is selected as the output device, the computer's audio alerts will be
played using the DUO-CAPTURE; they will not be heard from the computer's speakers.
12
Proceed to p. 14