Logging In To The Gbe Switch Module - Nortel 10 Installation Manual

Logging in to the GbE switch module

The GbE switch module supports user-based security that allows you to
prevent unauthorized users from accessing the switch or changing its settings.
To log in to the GbE switch module, complete the following steps:
1. At the prompt, type your user ID and press Enter. The default user ID is
admin.
2. Type your password (default is admin) and press Enter. The default
password is admin. The main-menu window opens.
After you log on to the GbE switch module, you must set the date and time.
See the Nortel 10 Gb Uplink Ethernet Switch Module Command Reference guide to
perform this task and others as needed.
32
Nortel 10 Gigabit Uplink Ethernet Switch Module: Installation Guide