Voice Dialing; Speed Dial A Phone Number - Nokia N73 User Manual

Your device supports conference calls between a
maximum of six participants, including yourself.
To have a private conversation with one of the
participants, select
Select a participant, and select Private. The conference
call is put on hold on your device. The other
participants can still continue the conference call.
After you finish the private conversation, select
Options > Add to conference
conference call.
To drop a participant, select
Drop participant, scroll to the participant, and select
Drop.
4
To end the active conference call, press

Speed dial a phone number

To activate speed dialing, press
Settings > Call >
To assign a phone number to one of the speed dialing keys
( — ), press
Scroll to the key to which you want to assign the phone
number, and select
the voice mailbox.
To call in the standby mode, press the speed dial key
and .
56
Options > Conference
to return to the
Options > Conference
, and select
Speed dialling > On.
, and select Tools > Spd.
Options > Assign. is reserved for
Copyright © 2006 Nokia. All rights reserved.

Voice dialing

Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
> Private.
speaker's voice, so the user does not record voice tags in
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user's voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
>
saved on the contact card. To listen to the synthesized
voice tag, open a contact card, and select
voice tag.
.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you
Tools >
should not rely solely upon voice dialing in all
circumstances.
When you use voice dialing, the loudspeaker is in use.
dial.
Hold the device at a short distance away when you say the
voice tag.
1
To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
Options > Play