Bryant Thermidistat Control Homeowner's Manual page 30

COMMON TERMS AND WHERE TO FIND THEM
Dehumidification Set Point ....Pg. 9
The amount of moisture to be removed
from your home. You can check your
actual humidity level and your desired
dehumidification set point by pressing
the SET DHUM button.
Suggested settings: 50% – 60%
suggested depending on installation,
area of the country, and your heating &
cooling equipment.
Emergency Heat .....................Pg. 4
This indicates that auxiliary heat is
being used without the heat pump.
End .........................................Pg. 1
The END button returns the
Thermidistat Control to normal
operation.
26