Bryant Thermidistat Control Homeowner's Manual page 3

MODE button selects OFF, HEAT,
COOL and AUTO operation.
EMERGENCY HEAT (EHEAT) mode
is also included when the
thermidistat control is installed
with a heat pump.
SET DHUM
button allows
you to change
dehumidification
set point.
SET COOL button
allows you to
enter your
desired cooling
set point.
SET HEAT button
allows you to
enter your
desired heating
set point.
SET TIME button
allows you to
enter the time
of day.
SET HUM button
allows you to
change
humidification
set point.
NOTE: Not all messages displayed in above illustration will appear at once in any situation.
Year-Round Comfort.
Bryant's Thermidistat Control provides enhanced year-round comfort.
By providing both temperature and humidity control, this simple yet powerful
device lets you take the steam out of summer, the static out of winter and helps
eliminate that annoying moisture build-up on your windows when it's cold
outside. Comfort has never been quite this easy.
Making Life Easier.
Bryant puts your family's comfort at your fingertips with simple instructions,
responsive push buttons an an easy-to-read backlit LCD display. Once set, the
Thermidistat Control accurately monitors indoor conditions and reliably meets
your needs for consistent, energy-efficient indoor comfort.
ROOM TEMPERATURE
DISPLAYS shows current
room temperature.
RESET FILTER
FUNCTION restarts
VACATION
the timer that
button changes
determines the
temperature
next air filter
and humidity
change or cleaning.
set points to
Activated by press-
lower levels
ing VACATION and
for optimum
END buttons simul-
energy
taneously.
efficiency while
you're away.
OUTDOOR TEMPERATURE
DISPLAYS shows the out-
door temperature.
FAN button
chooses ON
END button
or AUTO fan
completes the
operation.
temperature
and humidity
set-up
sequence.
TIME OF DAY
DISPLAY exhibits the
time of day.
CLEAN FILTER
INDICATOR
lets you know
when it's time to
clean or replace
you system's air
filter
AUXILIARY HEAT
INDICATOR
is displayed when
a heat pump sys-
tem's auxiliary
heat is on.
UP AND DOWN
buttons change
the temperature
and humidity set
points. They are
also used to
access outdoor
temperature and
indoor humidity
levels.