Windows
If the Found New Hardware or
Found New Hardware Wizard
screen appears:
1
Remove the USB cable
connected to your computer.
The screen may close. In this case,
proceed from
.
2
Click Cancel to quit the screen.
3
Proceed from
.
1
(A)
Press the ON button (A) to TURN OFF
THE PRINTER.
•
Operating noise continues for about
15 seconds until the power turns off.
Make sure that the POWER lamp stops
fl ashing.
1
2
Turn on the computer, then insert the Setup
CD-ROM into the CD-ROM drive.
The setup program should run automatically.
Windows Vista
Windows XP/2000
•
If the program does not start automatically,
double-click the CD-ROM icon on the computer.
When the CD-ROM contents appear, double-
click MSETUP4.EXE .
4
2
3
5
Go to Step
Go to Step
7