Download Print this page

Troubleshooting; Product Support - A4 Tech. G7-300 User Manual

Advertisement

Windows Picture and Fax Viewer:
Notice
To ensure that your mouse sends and receives perfectly, please read below instructions for your reference:
1. Interference from iron panel of PC.
①②③④ USB Ports
2. Use USB extension wire to position the Nano-receiver at a far location to prevent electromagnetism interference from devices
which don't pass safety standard.
3. Avoid using the wireless mouse on a metal surface. Metals such as iron, aluminum, or copper shield the radio frequency
transmission and slow down the mouse's response time or cause the mouse to fail temporarily.
The radio frequency is 2.4GHZ, it is safe for our bodies, but please be cautious in using cardiac pacemaker or other body auxiliary
instruments.

Troubleshooting

If the mouse is not working:
1. Make sure the mouse is on.
2. Check battery and battery installation.
3. Check receiver installation.
4. Try another USB port.

Product Support

Need help with technical support? Please go to:
http://www.a4tech.com/ennew/support.asp and our support team will respond within 72 hours.
**Features and specifications of all A4 TECH products are subject to change without notification.
Specification
RF Data Transmit Rate
Modulation Type
Original
To get optimal performance, please plug the Nano-receiver into
③、④ to avoid shielding wireless signal when placing at ①、
②.
500k bps
Frequency
GFSK
ID Codes
After Drawing Line, the picture has been enlarged
2.407GHz ~2.473GHz
524,288 sets

Advertisement

loading