THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
The “Gesture Button” can be set to various functions in using our 16 in 1 software. Software Installation 1. Before installing the mouse software, please uninstall any previously installed mouse software. 2. Extract the ZIP file to your local disk and double click to start installation.
Page 4
Step 2: Press “Start Pair ID” to refresh ID Code. Step 1: Right click on the icon in the taskbar and select “Pair ID Program” Step 3: Remove the mouse batteries and insert again in 15 seconds, 6 digits of matching code will be displayed on the menu as shown “Mouse Pair ID OK”.
Page 5
D. Three Shiftable Report Rates There are 3 report rates can be preset for high sensitive response time of 2/4/8 milliseconds, it improves cursor delay and jumping problems of wireless mouse, saves power in working and increases accuracy when playing the games. Mouse Report Response Time Suitable Range...
Page 6
Zoom In & Zoom Out, Paste Text, Execute Program. Note: If the” Paste Text” of the “Office Sets” is selected, the “Figure. A” will pop up as shown; you may input texts to paste. Click right button of the mouse in “Text Area”...
Original After Drawing Line, the picture has been enlarged Notice: To ensure that your mouse and keyboard send and receive perfectly, please read below instructions for your reference: 1. Interference from iron panel of PC. To get optimal performance, please plug the Nano-receiver into ③、 ④...