Ambilight - Magnavox 42PFL86x6D User Manual

Stop 3D
If you switch to another channel or a
connected device, the TV switches back to
2D.
To stop watching 3D during a 3D program,
ADJUST. Select [2D/3D] > [2D],
press
then press OK. This forced 2D picture
shows only the 3D-left picture.
Note: The 2D/3D menu is only available
when the TV receives 3D content from the
input signal, or when [3D format] has been
set to [3D - Side by side] or [3D - Top /
bottom].
Optimal 3D viewing
For an optimal 3D viewing experience, we
recommend that you:

sit at a distance that is at least three
times the width (W) of the TV screen.
Do not sit more than six meters away.

view the center of the TV screen at
your eye level.

watch the TV away from direct sunlight
as it may interfere with the 3D
experience.
EN 20

Ambilight

What you can do
*Available on certain models only.
Ambilight gives a more relaxed viewing
experience. It automatically adjusts the color
and brightness of the light to match the TV
picture.
What you need

For the best Ambilight effect, position
the TV 25 cm away from the wall.

Keep the remote control away from
the TV, as it can interfere with the
infrared signals.

Dim the light in the room.