Switch Rear Panel - Planet IGSW-24040T User Manual

■ 10/100/1000Base-T interfaces
LED Color
1000
Green
LNK/ACT
10/100
Orange
LNK/ACT
■ 1000Base-SX/LX SFP interfaces (Shared Port-21~Port-24)
LED Color
LNK/ACT Green

2.1.3 Switch Rear Panel

The rear panel of the Managed Switch indicates an AC inlet power socket, which accepts input power from 100 to 240V AC,
50-60Hz. Figure 2-3 shows the rear panel of this Managed Switch.
IGSW-24040T Rear Panel
■ AC Power Receptacle
For compatibility with electric service in most areas of the world, the Managed Switch's power supply automatically adjusts
to line power in the range 100-240VAC and 50/60 Hz.
Plug the female end of the power cord firmly into the receptalbe on the rear panel of the Managed Switch. Plug the other
end of the power cord into an electric service outlet then the power will be ready.
Lights: To indicate the link through that port is successfully established with speed
1000Mbps.
Blink: To indicate that the switch is actively sending or receiving data over that port.
If L10/100 NK/ACT LED light-> indicate that the port is operating at 10Mbps or
Off:
100Mbps.
If LNK/ACT LED Off -> indicate that the port is link down.
Lights: To indicate the link through that port is successfully established with speed
10Mbps or 100Mbps.
Blink: To indicate that the switch is actively sending or receiving data over that port.
If 1000 LNK/ACT LED light-> indicate that the port is operating at 1000Mbps
Off:
If 1000 LNK/ACT LED Off -> indicate that the port is link down.
Lights: To indicate the link through that SFP port is successfully established.
To indicate that the SFP port is link down
Off:
Figure 2-3 Rear Panel of IGSW-24040T
Function
Function
29
User's Manual of IGSW-24040T