Focus - Samsung SDZ-375 User Manual

Operating Your Camera
ZOOM' position.
• START ZOOM : Use the left or right button in the 'START ZOOM' item to select the zoom position
from 1x to 37x to be returned after the 'SMART ZOOM' action is over.
• TARGET ZOOM : Use the left or right button in the 'TARGET ZOOM' item to select the zoom
position from 1x to 37x to be used during MOTION DETECTION.
• DWELL TIME : Use the left or right button in the 'DWELL TIME' item to select a time between
5 and 60 seconds for the dwell time before the zoom is returned to the 'START
ZOOM' position. (5,7,10,15,20,30,40,60 sec)
TOP, BOTTOM, LEFT,RIGHT : You can adjust the size of the area
Notes
Tips on Using the Motion Detection Feature
• T he feature may not function properly under flickering light conditions.
• T he camera interprets sudden changes in lighting and subsequent change in brightness of
an object as motion.
• W ith the feature enabled, other algorithms may require additional time to operate than
usual.
Notes
• T his system does not guarantee prevention of fire or theft. The
manufacturer shall not be held responsible for any accident or
damage incurred.
• C onnect an external alarm device to MD Out on back of the
camera.

FOCUS

MAIN SETUP
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
COLOR CCD CAMERA
ATW
OFF
OFF
20
User Guide
1. Press the SET button to access the main setup manu and then position the
indicator over FOCUS using the UP or DOWN button.
2. Press the SET button.
MODE : You can select the most suitable zoom mode. Move the arrow indicator to
'MODE' using UP or DOWN button.
FOCUS SETUP
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
ZOOM POS INIT
USER PRESET
LENS INIT
END
• AUTO : Select AUTO and press the SET button to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM)
positions using the UP or DOWN button
while verifying the changes on screen.
Enabling D-ZOOM (ON) means that digital
zoom will activate once optical zoom
ends. Focus is automatically adjusted with
moving zoom.
• ONE PUSH : Focus is automatically adjusted just once,
after zoom position is changed. Select
'ONE PUSH' and press the SET button to
confirm. Increase or decrease optical zoom
(ZOOM) or digital zoom (D-ZOOM)
positions using the directional buttons
while verifying the changes on screen.
Press the SET button once desired image quality is obtained.
COLOR CCD CAMERA
AUTO
AUTO TRACK
FAST
OFF
OFF
OFF
MANUAL
ZOOM POS SETUP
↑ : TELE ↓ : WIDE
ZOOM/FOCUS POS SETUP
↑ : TELE ↓ : WIDE
← : NEAR → : FAR
21
User Guide