Table of Contents
Advertisement
Start-up and use
! The first time you use your appliance, heat the
GB
empty oven with its door closed at its maximum
temperature for at least half and hour. Make sure
that the room is well ventilated before switching the
oven off and opening the oven door. The appliance
may emit a slightly unpleasant odour caused by
protective substances used during the
manufacturing process burning away.
! To make the setting process easier, press and
hold the + and – buttons to scroll through the
numbers on the display rapidly.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! During operation, we recommend the removal of
any crockery or delicate foodstuffs from the cavities
not being used.
Some models are equipped with a system of hinges
which allows the door to close slowly, without the
user having to follow the movement through with his/
her hand. To use the system correctly, before
closing the door:
• Open the door fully.
• Do not force the closing movement manually.
! Once cooking has begun, before the DIVIDER is
removed, the oven must be switched off using the
button.
! Every time the oven is switched on it is set to the
CREATION cooking mode.
! The touch controls cannot be activated if the user
is wearing gloves.
Control panel/door lock
! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer will sound
and the TEMPERATURE display shows the key
symbol "O—n". The
lock activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
6
icon will light up to indicate
Setting the clock
! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the
button once will display the current
time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
button and the digits on the
display will flash for 10 seconds.
To set the clock:
1. Press button
.
2. Turn the TIMER knob towards "+" and "-" to
adjust the hour value.
3. Once you have reached the correct hour value,
press the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the
icon flashes on the display, this
indicates that the clock has not been set correctly.
Setting the minute minder
! The minute minder may be set regardless of
whether the oven is switched on or off. It does not
switch the oven on or off.
When the set time has elapsed, the minute minder
emits a buzzer that will automatically stop after 30
seconds or when any active button on the control
panel is pressed.
To adjust the minute minder, proceed as follows:
1. Press button
.
2. Adjust the time as desired by turning the TIMER
knob towards "+" and "-".
3. Once you have reached the desired value, press
the
button again.
The lit
symbol will remind you that the minute
minder is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
and use the knob to set the time to 00:00. Press
button
again.
The
icon will switch off to indicate that the
minute minder has been disabled.
button
Advertisement
Table of Contents
