How to use the Quick Navi screen
Using the Quick Navi screen, you can change settings directly on the recording information display when
the screen mode is set to [For viewfinder] (Quick Navi).
1
Press the DISP button to set the screen mode to [For viewfinder].
2
Press the Fn button to switch to the Quick Navi screen.
In Auto Mode or Scene Selection mode
In Tele-zoom Cont. Priority AE/P/A/S/M/Sweep Panorama mode
3
Select the desired item with
4
Set the item with the front or rear control dial.
• Select an option with the front control dial and adjust it with the rear control dial.
• Pressing the center of the multi-selector turns on the designated screen used to set up the selected
item.
• Pressing the Fn button again turns off the Quick Navi screen and the screen goes back to the
original one.
on the multi-selector.
The functions operated with the buttons/dial
ENG
27