Regza-L1Nk Input Source Selection; Volume And Mute Controls Of Audio Receiver; Other Regza-Link Functions - Toshiba Regza 32RV530U Owner's Manual

3
Press .. or T to select the item you want to control and
press
8.
REGZA-LINK Player Control menu functions:
1
Press
MOU
and open the Applications menu.
2
Highlight REGZA-L1NK Player Control and press
8.
With your TV's remote control, you can adjust or mute the
sound volume of the Audio Receiver. First, set the MODE
SELECT switch on the remote control to TV.
• (.t;)
~
adjust the volume level.
• M()E
turns off the sound.
Note:
• To use this function:
- Set Speaker Preference to Audio Receiver in the
REGZA-LINK Setup menu.
- Confirm that a connected REGZA-LiNK device (such as
HO OVO player, etc) is selected for the Audio Receiver
input source.
• You can also use this function when the audio receiver is
connected to the TV's DIGITAL AUDIO OUT terminal (not
HOMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
Other REGZA·LlNK functions
VOLUME and MUTE controls of Audio
Receiver
Accesses the top menu of a DVD.
Accesses the menu of a DVD.
Turns the select device on and off.
Accesses the contents list when you press
8.
At this time, the REGZA-LINK Player
Control menu will disappear.
Menu
Power
Contents
Menu
Top Menu
When the Enable REGZA-L1NK and each item in the
REGZA-L1NK Setup menu are set to On, the following
functions will be enabled.
Note:
• These functions depend on the devices that are connected.
• The REGZA-LiNK Player Control item will be grayed out in
the following conditions:
- A non-HOMI input is currently selected.
- The Enable REGZA-LINK item is set to Off.
- The connected CEC device is not a playback or recording
device.
TV Auto
Input Switch
.' O.,cription
If a connected HDMI device starts playing
video or audio, the TV will automatically
switch to the appropriate HDMI input.
REGZA·LlNK input source selection
If a REGZA-LINK device with HDMI switching capability
(e.g. Audio Receiver) is connected to the HDMI input, you can
select another REGZA-LINK device that is connected to the
master HDMI device using the TV's INPUT button. See page
35 for details.
TV Auto Power
Device Auto
Standby
Speaker
Preference
If a REGZA-LINK device is turned on, the
TV turns on automatically.
If the TV is turned off the TV will send a
message to turn off all of the REGZA-
LINK devices connected to the TV.
From this item, you can set your audio
output preference to the TV speakers or the
audio receiver speakers. When this item is
set to Audio Receiver, the TV remote can
be used to adjust or mute the volume of the
audio. This item will be grayed out unless a
REGZA-LINK compatible audio receiver
is connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV speakers.
I
52