Removing The Bezel - IBM IntelliStation Z Pro 6223 Installation Manual

Removing the bezel

When working with some devices, such as additional optical drives, you must first
remove the bezel to access the device. To install or remove options, you might find
it easier to lay the computer on its side.
Complete the following steps to remove the bezel:
1. Unlock the side-cover lock.
2. Remove the side cover (see "Removing the side cover" on page 16).
3. Locate the two bezel clips that are securing the bezel to the computer chassis.
For instructions for replacing the bezel, see "Replacing the bezel" on page 40.
Gently lift and hold the bezel clips up and at the same time, rotate the bezel
outward to disengage it from the side tabs; then, set the bezel aside.
Bezel clips
Chapter 2. Installing the hardware
17