Disarming The System - First Alert ReadyGuard Touch User Manual

SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES

Disarming the System

Select the "Disarm" icon or the "Off" key to disarm the system and to silence alarm and
trouble sounds. See the Summary of Audible Notification section for information, which will
help you to distinguish between fire and burglary alarm sounds. During Entry Delay or when
an Alarm Condition exists, the system will be disarmed as soon as the correct user code is
entered on the touch screen. Selecting the Off key is not required. The entry beeps or alarm
sound can be silenced by pressing any key however, it will restart in 10 seconds if the correct
User Code is not entered. The Ready indicator will light (if no alarms have occurred while
armed) and the control will beep once to confirm that the system is disarmed.
If the ReadyGuard Touch is beeping rapidly upon entering the premises, an alarm has oc-
curred during your absence and an intruder may still be on the premises. LEAVE
IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.
Disarming the System and Silencing Alarms
Armed Stay
Disarm
10:18 AM June 8, 2010
Armed Stay
Enter Code:
Cancel
If an invalid User Code is entered, system will return to the home screen.
**IMPORTANT**
72
Zones Automation
Message Phone
More
5000-100-056-V1
1 2 3
4 5 6
7 8 9
Clear 0
5000-100-065-V0
– 26 –
1. Select the "Disarm" icon or depress the
"Off" key. The system beeps once and
displays a keypad.
2. Enter a valid Code. The system beeps
once and announces "Disarmed Ready to
Arm".
Note: If a valid user code is not entered or the
Confirm icon has not been selected
within 30 seconds, the system returns to
the "home" screen and it will not be
disarmed.