Disarming Your System; Bypassing A Zone - First Alert FA 270 Instruction Manual

Security Code + 3
Night-Stay Mode
Security code + 7
Instant Mode
Away Mode Security Code + 2
Security Code + 4
Maximum Mode

Disarming your system

•
When you return and enter through the entry/exit door an entry delay timer will start
(usually 30 seconds.)
•
A "pre-alarm" entry warning will sound.
•
Enter your Security Code + 1
1. the red armed light will go off
2. The key pad will "beep" once

Bypassing a Zone

The 6 key is used to disable individual zones.
BYPASS
•
You can only bypass and un-bypass zones when the system is not armed.
•
You cannot bypass 24-hour fire and emergency zones.
•
Bypassed zones will automatically become un-bypassed when the system is disarmed.
•
Bypassed zones are unprotected and will not cause an alarm if violated.
To Bypass:
•
Enter your security code + 6
•
Enter the 2-digit zone number(s) for the zone(s) to be bypassed. Single digit zones must be
preceded by a zero (e.g. 05, 06)
+ 3
STAY STAY
INSTANT
AWAY
MAX
OFF
BYPASS
•
STAY NIGHT message displayed
•
Red ARMED indicator light
•
Three Beeps
•
STAY INSTANT message
displayed
•
Red ARMED indicator light
•
Three Beeps
•
Note that entry delay is turned off
•
AWAY message displayed
•
Red ARMED indicator light
•
Two Beeps
•
Leave premises
entry/exit door during the exit delay
period to avoid causing an alarm.
The keypad beeps rapidly during
the last 10 seconds of the exit
delay to warn you that it is ending.
•
AWAY INSTANT message
Displayed
•
Red ARMED indicator light
•
Two Beeps
•
Same as Away (described above)
•
Note that entry delay is turned off.
Page 6
through an