Auxiliary Harness Wire Connection Guide
Auxiliary Harness Wiring Diagram
___
LIGHT BLUE
H2/1
___
GREY
H2/2
___
ORANGE/BLACK
H2/3
___
GREY/BLACK
H2/4
___
WHITE/BLACK
H2/5
___
VIOLET/BLACK
H2/6
___
LIGHT BROWN
H2/7
___
LIGHT GREEN/BLACK
H2/8
Auxiliary Harness Wiring Instructions
H2/1 LIGHT BLUE (-) second unlock output (200mA)
This wire produces a (-) 200mA output for progressive locks in which the driver door unlocks first
and the remaining locks unlock with a second press of the unlock button.
H2/2 GREY (-) hood pin input, zone 6 This wire is connected to hood pinswitch. This will trigger
the security system if the hood is opened while the system is armed and report Zone 6. This input
can be programmed for N.O. or N.C. contact, refer to Systems Features Menus .
H2/3 ORANGE/BLACK (-) retained accessory output
N N O O T T E E : An additional relay (not supplied) is required for most applications.
Connect this wire to the accessory wire in the vehicle that powers the accessories in the vehicle. This
wire will retain power after the ignition key is turned off. This output ceases when a door is
open/closed or the system is armed.
H2/4 GRAY/BLACK (-) channel 6 output
This wire provides a (-) 200mA output whenever the transmitter button(s) controlling Channel 6
is pressed. This output can be programmed to provide the following types of outputs (see also the
Feature Menus section):
10
(-) Second Unlock
(-) Hood Pin Input, Zone 6
Retained Accessory Output
(-) Channel 6 Output
(-) Channel 5 Output
(-) Channel 4 Output
(-) Horn Honk Output
(-) Factory Disarm Output
©
2005
Directed Electronics, Inc.