Impact Sensor Adjustment - Python Responder LC Model 991 Installation Manual

Impact Sensor Adjustment

Make sure the keypad is unlocked and the vehicle is disarmed with no open
zones.
Press and hold the
3 seconds ignore the car select indicator) and continue holding.
The status screen clears and the LCD text displays "main menu". Release the
button and the LCD text changes to the remote setup options table.
Pressing the
Pressing the
When the desired Main Menu option (Sensor Adjust) is displayed on the
LCD text press and hold the
times and the siren will emit one long chirp confirming entry into the sensor
adjust mode.
The LCD text displays the current level setting of the impact sensor.
Pressing the
the button decreases the sensitivity on level.
When the desired level is reached, press
setting.
32
(Light Flash Fuse Jumper is under
access door - use needle nose pliers to
change fuse position)
button on the remote for approximately 8 seconds (at
button steps up one Main Menu option per press.
AUX
button steps down one Main Menu option per press.
button increases the sensitivity up one level and pressing
AUX
Access door
button for 1 second, the remote beeps three
on the remote to lock in the
© 2008 Directed Electronics. All rights reserved.