Python Responder LC Model 991 Installation Manual page 19

Responder lc security and remote start

Hide thumbs Also See for Responder LC Model 991:

Table of Contents

Relay for Negative (-) Disarm Wire

LIGHT GREEN/WHITE

H2/2

This wire sends a negative pulse every time the remote start shuts down or when

the doors are locked with the remote. This can be used to pulse the arm wire

of the vehicle's factory anti-theft device. Use a relay to send a (-) or (+) pulse to

the arm wire.

WHITE/VIOLET

H2/3

This wire provides 200 mA programmable output whenever the transmitter but-

tons controlling Aux 1 channel is pressed. (See descriptions for Aux 3)

VIOLET/BLACK

H2/4

This wire provides 200 mA programmable output whenever the transmitter but-

tons controlling Aux 2 channel is pressed. (See descriptions for Aux 3.)

(-) 200mA FACTORY ALARM ARM OUTPUT

(-) 200mA AUX 1 OUTPUT

Warning!

Never use this wire to drive anything

but a relay or a low-current input! This transistor-

ized output can only supply 200 mA. Connecting

directly to a solenoid, motor, or other high-current

device will cause the module to fail.

(-) 200mA AUX 2 OUTPUT

Relay for Positive (+) Disarm Wire

Table of Contents

Show Quick Links

Table of Contents