Using The Configuration Utility; Logging Into Utility - D-Link AirPlus G DWL-G700AP Manual

Using the Configuration Utility

If you wish to change the default settings or optimize the performance of the
DWL-G700AP, D-Link has included a configuration utility for this purpose.
After you have completed the initial installation and the Setup Wizard (as illustrated in
the Quick Installation Guide that is included with the DWL-G700AP), you can access the
configuration menu, at any time, by opening the web-browser and typing in the IP address
of the DWL-G700AP. The DWL-G700AP's default IP address is shown below:
Open the web browser

Type in the IP address of the

DWL-G700AP. (192.168.0.50).
Note: If you have changed the default IP address assigned to the DWL-G700AP, make sure to
enter the correct IP address.
 Type admin in the
User Name field
 Leave the Password
blank
Click OK

The Home > Wizard
s c r e e n w i l l a p p e a r.
Please refer to the Quick
Installation Guide for more
information regarding the
Setup Wizard.
9
admin