Placing The Rack-Mounted 8202-E4B, 8202-E4C, 8205-E6B, Or 8205-E6C System Into The Operating Position - IBM 9117-MMB User Manual

Figure 38. Placing the system in the service position
4. While holding the system unit release latches (A) down on both the left and right sides, pull the
system unit (B) out from the rack until the rails are fully extended and locked.
Placing the rack-mounted 8202-E4B, 8202-E4C, 8205-E6B, or 8205-E6C system into
the operating position
Use this procedure to place the rack-mounted system into the operating position.
45
Power supplies