Radio; Using The System - Skoda Radio Blues Owner's Manual

Radio

Using the system

Change frequency range
Your device is capable of receiving a radio reception in the FM and AM analogue
frequency range.
›
To change the frequency range, briefly press the
function key FM1, FM2, AM1 or AM2.
or
›
Briefly press the button.
RADIO
There are 6 memory slots available for each of these frequency range groups.
Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by turning the settings knob
Automatic station search
›
The device searches for the next radio station in the selected waveband by
pressing the button or briefly.
 
Function SCAN
›
Pressing the menu button or the
2
tion key SCN briefly (for 10 seconds) enables the radio channels of current
8
waveband to be played.
›
This function is ended by pressing menu knob
station is played again.
Function AS
›
Press the button and then the AS
MENU
tion finding is started during which the 6 stations with the strongest signal in
the memory level FM1 and/or AM1 are stored.
Store station
›
After selecting the radio station, press the selection button
station should be stored and hold it pressed in until the radio station briefly
switches to mute and a brief signal sounds.
button followed by the
RADIO
button and then pressing the func-
MENU
, which will mean the current
2
function button. An automatic sta-
8
, on which the
8
RDS Function
Certain radio stations transmit additional text information - designated as radio
text.
Note
The text information must not be available to all radio stations.
■
Depending on the quality of the signal, the device may need some time in order
■
to load all the displayed characters.
Traffic news function
Switching on/off
›
Flick the switch.
TP
 The traffic service are deactivated by flicking the
 icon goes out.
Activating/deactivating traffic reports
Functional readiness of the traffic news service is indicated via the  icon.
During playback in Media mode, the last selected radio station that supports traf-
.
2
fic news will continue to be received in the background. If a traffic news station
has not been set recently, then the most appropriate traffic news station is set
automatically in the background. While searching for an appropriate station, TP
SEEK is displayed on the screen.
If the set radio station does not broadcast traffic news,   is displayed on the
screen.
An incoming traffic report automatically interrupts playback or listening to a radio
station that is not currently transmitting traffic news. INFO and station name is
displayed on the screen. Once the traffic news have ended, the device automati-
cally returns to the original playback mode.
Note
Some radio stations misleadingly identify themselves as traffic programs. It is
therefore not an error with the unit that there are no traffic news on these sta-
tions.


switch again. The displayed
TP

5
Radio