Table of Contents
Advertisement
As the unit only functions after entering the safety code, this practically excludes
its use after a theft - a contribution to increased anti-theft safety.
Note
The code is stored in the instrument cluster. This ensures that it is automatically
decoded (convenience coding). Manual input of the code is normally not necessa-
ry.
Enter code
›
Switch on the radio with the ignition turned on. SAFE is displayed and then
1000.
›
Use the selection buttons
-
1
4
›
Confirm the safety code by pressing the selection buttons
If an incorrectly entered code is confirmed, the procedure can be repeated once
again.
If the code number is entered incorrectly for the second time, the unit will be
blocked for approx. one hour. It is possible to enter the safety code again after
one hour has expired if both the device and the ignition have stayed turned on
during that time.
The cycle - two attempts, blocked for an hour - will continue to apply.
to enter the safety code.
8
.
8
6
Device specification and operation
Device specification
Fig. 1 Equipment overview
- Setting up button
1
›
for switching the equipment on and off (press)
›
for volume control (turn)
Settings knob
2
›
to activate the Scan function
›
for settings in the individual operating modes
button to activate the radio mode
3
RADIO
button to activate the play function of audio sources
4
MEDIA
Buttons
5
›
manual station finding, select the track in CD mode (press briefly)
›
fast station finding, fast forward/reverse in CD mode (press and hold)
Button
to activate the reception of traffic reports
6
TP
3
General information
Advertisement
Table of Contents
