Operation - DeWalt DCF895-XE Instruction Manual

F. Battery pack
FIG. 2
D
G
C
A
J
E
F
INTENDED USE
These impact wrench/drivers are designed for professional impact screwdriving
applications. The impact function makes this tool particularly useful for driving
fasteners in wood, metal and concrete. DO NOT use under wet conditions or in
presence of flammable liquids or gases.
These heavy-duty impact wrench/drivers are professional power tools. DO NOT let
children come into contact with the tool. Supervision is required when inexperienced
operators use this tool.
L. Magnetic bit clip
G
B
G
K
H
I
Belt Hook and Bit Clip (Fig. 2, 3)
WARNING: To reduce the risk of serious personal
injury, place the forward/reverse button in the lock-
off position or turn tool off and disconnect battery
pack before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the belt hook. ONLY hang tool's belt hook from a work belt.
WARNING: To reduce the risk of serious personal injury, ensure the screw
holding the belt hook is secure.
IMPORTANT: When attaching or replacing the belt hook or bit clip, use only the screw
(I) that is provided. Be sure to securely tighten the screw.
The belt hook (H) and bit clip (L, Fig. 3) can be be attached to either side of the tool
using only the screw (I) provided, to accommodate left- or right- handed users. If the
hook or bit clip is not desired at all, it can be removed from the tool.
To move belt hook or bit clip, remove the screw (I) that holds it in place then
reassemble on the opposite side. Be sure to securely tighten the screw.

OPERATION

WARNING: To reduce the risk of serious personal injury, place the forward/
reverse button in the lock-off position or turn tool off and disconnect battery pack
before making any adjustments or removing/installing attachments or accessories.
An accidental start-up can cause injury.
Installing and Removing the Battery Pack (Fig. 4)
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (F) into the tool handle, align the battery pack with the rails
inside the tool's handle and slide it into the handle until the battery pack is firmly
seated in the tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release button (E) and firmly pull
the battery pack out of the tool handle. Insert it into the charger as described in the
charger section of this manual.
8
FIG. 3
L
I