DeWalt DCF894 Manual
Hide thumbs
Also See for DCF894:
- Instructions manual (145 pages) ,
- Instruction manual (41 pages) ,
- Manual (40 pages)
Table of Contents
Advertisement
Quick Links
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Fig. A
Trigger switch
1
Forward/reverse control button
2
Anvil
3
Main handle
4
Battery release button
5
Battery pack
6
Worklight
7
Mode selector
8
Belt hook (Optional Accessory)
9
Mounting screw
10
3
1
8
7
5
2
4
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
if you have any questions or comments about this or
any D
WALT tool, call us toll free at:
e
1-800-4-D
WALT (1-800-433-9258).
e
English
10
9
6
1
Advertisement
Table of Contents
Related Manuals for DeWalt DCF894
Summary of Contents for DeWalt DCF894
- Page 1 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 2: General Power Tool Safety Warnings
English GENERAL POWER TOOL SAFETY WARNINGS mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce WARNING! Read all safety warnings and all personal injuries. instructions. Failure to follow the warnings and c ) Prevent unintentional starting. Ensure the instructions may result in electric shock, fire and/or switch is in the off position before connecting to serious injury. -
Page 3: Additional Specific Safety Rules
English operations different from those intended could result WARNING: Some dust created by power sanding, in a hazardous situation. sawing, grinding, drilling, and other construction activities contains chemicals known to the State 5) Battery Tool Use and Care of California to cause cancer, birth defects or a ) Recharge only with the charger specified by the other reproductive harm. -
Page 4: Batteries And Chargers
English • Contents of opened battery cells may cause ..... visible radiation ..... wear hearing respiratory irritation. Provide fresh air. If symptoms protection ..... wear respiratory persist, seek medical attention...... read all protection WARNING: Burn hazard. Battery liquid may be documentation ..... - Page 5 WALT (1-800-433-9258) or the gauge number of the wire, the greater the capacity visit our website www.dewalt.com. of the cable, that is, 16 gauge has more capacity than 18 gauge. An undersized cord will cause a drop in line voltage The RBRC®...
- Page 6 English battery pack in the cavity. Unplug the charger before Minimum gauge for Cord sets attempting to clean. Total length of Cord in Feet Volts Wireless Certifications and (meters) 120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7) Safety Information 240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4) •...
-
Page 7: Charger Operation
English • The connectivity range is up to 100 feet (30.5 meters) The compatible charger(s) will not charge a faulty battery depending on environment and location. pack. The charger will indicate faulty battery pack by refusing to light or by displaying a problem pack or charger •... -
Page 8: Storage Recommendations
English Intended Use the battery pack in an air temperature below +40 °F (+4.5 °C), or above +104 °F (+40 °C). This is important This impact wrench is designed for professional impact and will prevent serious damage to the battery pack. fastening and drilling applications. The impact function 2. - Page 9 Place the switch in the locked off (center) position or remove battery pack before changing accessories. Anvil with Detent Pin (Fig. E) DCF894 Precision Wrench™ (Fig. D) To install an accessory on the anvil, align the hole in the side of the accessory with the detent pin ...
-
Page 10: Operation
Cat # injury, turn unit off and remove the battery pack Precision Wrench™ Precision Wrench™ before making any adjustments or removing/ DCF894, DCF894H 0–150/0–330/0–330 200/447/447 installing attachments or accessories. An CAUTION: Ensure fastener and/or system will accidental start-up can cause injury. -
Page 11: Register Online
Recommended accessories for use with your tool 2 YEARs FREE sERViCE On DEWAlT BATTERY PACKs are available at extra cost from your local dealer or DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, authorized service center. If you need assistance in...