Changing The Date And Time - Canon PowerShot SX160 IS Getting Started

Changing the Date and Time

Adjust the date and time as follows.
Metric/Non-Metric Display
Change the unit of measurement shown in the MF indicator (= 9 1) and
zoom bar (= 4 2) from m/cm to ft/in as needed.
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed
on the screen. Other certification logos are printed in this guide, on the
camera packaging, or on the camera body.
Adjusting Basic Camera Func ions
1
Access the [Date/Time] screen.
z Choose [Date/Time], and then press the
<m> button.
2
Configure the setting.
z
Press the <q><r> buttons to choose an
item, and then adjust the setting, either
by pressing the <o><p> buttons or
turning the <5> dial.
z
Choose [Units], and then choose [ft/in].
z Choose [Certification Logo Display], and
then press the <m> button.
151