Canon PowerShot SX160 IS Getting Started page 140

•
<D>: Manual
• Calcula ion of standard exposure is based on the specified metering method
(= 8 2).
Adjusting the Flash Output
Choose from the three flash levels in <D> mode.
• You can also set the flash level by accessing <n> (= 3 8) and
choosing [Flash Output] in [Flash Set ings] on the [4] tab.
• You can set he flash level in <M> or <B> mode by accessing <n>
(= 3 8), choosing [Flash Settings] on the [4] tab, and then set ing [Flash
Mode] to [Manual].
• You can also access the [Flash Settings] <n> screen as follows.
- When the flash is up, press the <r> button and immediately press he
<n> button.
Specific Shutter Speeds and Aperture Values (<M> Mode)
1
Enter <D> mode.
z Set the mode dial to <D>.
2
Configure the setting.
z
Press the <m> button, choose [X] in
the menu, and adjust the setting by either
pressing the <q><r> buttons or turning
the < 5 > dial (= 3 7).
Once the setting is complete, [X] is
X
displayed.
Still Images
107