Lens Retraction Timing - Canon PowerShot SX160 IS Getting Started

Lens Retraction Timing

The lens is normally retracted for safety about one minute after you press
the <1> button in Shooting mode (= 3 4). To have the lens retracted
immediately after you press the <1> button, set the retraction timing to
[0 sec.].
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (= 3 4).
• To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
• The [Display Off] setting is applied even if you set [Auto Power Down] to
[Off].
Adjusting Basic Camera Func ions
z
Choose [Lens Retract], and then choose
[0 sec.].
1
Access the [Power Saving]
screen.
z Choose [Power Saving], and then press
the <m> button.
2
Configure the settings.
z After choosing an item, press the
<q><r> buttons to adjust it as needed.
149