Precautions - Eizo Radiforce MX241W User Manual

WARNING
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
The unit is designed for use with a specific voltage only. Connection to another voltage
•
than specified in this User's Manual may cause fire, electric shock, or equipment damage.
Power supply: 100-120/200-240 Vac, 50/60 Hz
Do not overload your power circuit, as this may result in fire or electric shock.
•
Handle the power cord with care.
Do not place the cord underneath the unit or other heavy objects.
•
Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a
•
damaged cord may result in fire or electric shock.
For the electrical safety, do not connect or disconnect the power cord in the
presence of patients.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to come unattached, which may result in injury or equipment
damage. When the unit is dropped, please ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or electric
shock. When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Fluorescent backlight lamps contain mercury (the products that have LED
backlight lamps contain no mercury), dispose according to local, state or
federal laws.

PRECAUTIONS