Table of Contents
Advertisement
Chapter 1 Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
24" wide format LCD
•
Applicable to the resolution 1920 dots x 1200 lines
•
Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
•
3 signal input terminals (DVI-I x 2, DisplayPort x 1)
•
CAL Switch function for selecting an optimal calibration mode
•
"2-3. To select the display mode (CAL Switch)"
DICOM mode (CAL Switch function)
•
The quality control software "RadiCS LE" (for Windows) used to calibrate the monitor is included
•
"1-3. Utility Disk"
The software "ScreenManager Pro for Medical" (for Windows) to adjust the screen using the mouse
•
and keyboard is included
"1-3. Utility Disk"
Frame Synchronous mode supported (59 - 61 Hz)
•
Power saving function
•
This product is equipped with power saving function.
-
Power Consumption when main power switch is Off: 0W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not
used.
-
Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably.
Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing
the excessively high brightness will be helpful to reduce the power consumption and the damage to your eyes.
"4-3. Setting Monitor's Automatic Brightness Adjustment [Auto EcoView]"
HDCP (High-bandwidth Digital Content Interface)
•
Portrait/Landscape display available (rotate 90 degrees clockwise)
•
NOTE
This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the
•
Adjustment menu when using the monitor screen in vertical display position. (Refer to "To set the orientation of
the Adjustment menu [Orientation]" on
For using the monitor with "Portrait" position, the graphics board supporting portrait display is required. When
•
using the monitor with "Portrait" position, the setting needs to be changed depending on the graphics board used
in your PC. Refer to the manual of the graphics board for details.
Chapter 1 Introduction
10
(page
(page
11)
(page
11)
page
26.)
(page
19)
42)
(page
29)
- Quick Links:
- Locking Buttons [Key Lock]
Hide quick links:
Advertisement
Table of Contents
