●
To set input signal selection [Input Selection]
The monitor recognizes the connector through which PC signals are input.
Priority setting
Auto
Manual
Procedure
1.
Choose <Tools> from the Adjustment menu, and press
2.
Choose <Input Selection> from the <Tools> menu, and press
The <Input Selection> menu appears.
3.
Select "Auto" or "Manual" with
4.
Press
to exit the adjustment.
Attention
When "Auto" is selected for <Input Selection>, the monitor's power-saving function works only when all PCs are
•
in the power-saving mode.
When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
The monitor detects only the PC's signals currently displaying automatically. Select
an active input signal with
.
or
Function
.
.
.
Chapter 6 Reference