Starting An Iron Aid; Tm Programme - Electrolux EDI 96150 W User Manual

Iron aid condenser dryer
Hide thumbs Also See for EDI 96150 W:
Table of Contents

Advertisement

125986590.qxp
2007-01-29

Starting an Iron Aid

programme
Press the START/PAUSE button. The
programme is started.
First, the drying phase indicator
appears in the display.
The display will also show the
programme duration for the selected
Iron Aid programme, not including the
additional drying phase.
With wet laundry, after a few minutes
the appliance will show the correct
programme duration for the Iron Aid
programme including the preceding
drying programme.
As soon as the right level of dryness is
reached, the Iron Aid programme will
start automatically. The steam indicator
shows the progress of the Iron Aid
programme in the display. The
individual steam phases are shown by
animated clouds of steam.
Important: During the steam phases
that form part of the Iron Aid
programme and also the anti-c c rease
phase (represented by animated
clouds of steam in the display), the
loading door cannot be opened.
Risk of burns!
If the
water tank indicator lights up
when you select an Iron Aid
programme, the programme cannot be
started. You will need to fill the water
tank first (see section on 'Cleaning and
maintenance, filling water tank'.)
10:49
Page 21
starting an iron aid
TM
It is normal for the appliance to make
noises during an Iron Aid or drying
programme if garments with hard
parts, such as metal buttons, are put in
the drum.
Changing a programme
To change a programme which has
been selected by mistake once the
programme has started, first turn the
programme selector to O OFF and
then reset the programme.
The programme can no longer be
changed directly once the programme
has started. If you nevertheless attempt
to change the programme with the
programme knob or an additional
function button (except the BUZZER
button), the START/PAUSE button and
E E r r r r will flash in the display. The drying
programme is not however affected by
this.
Putting in extra items or taking
items out before end of programme
1. Open door.
Warning! Laundry and drum can bec-
ome hot. Risk of burns!
2. Load or remove laundry items.
3. Close door securely.
4. Press the START/PAUSE button to
continue the drying cycle.
tm
programme electrolux 21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents