Electrolux EDI 96150 W User Manual page 37

Iron aid condenser dryer
Hide thumbs Also See for EDI 96150 W:
Table of Contents

Advertisement

125986590.qxp
2007-01-29
Problem
Drying results unsatisfactory.
When you press a button Err
appears in the multidisplay.
Drying cycle ends shortly after
programme starts. ANTICRE-
ASE display illuminated.
Programme inactive, TANK dis-
play illuminated.
PROGRAMME TIME display
changes erratically or stays
unchanged for a long time.
Drying cycle lasts an unusuall-
ly long time.
Note: After up to 5 hours the
drying cycle ends automati-
cally (see 'End of drying
cycle').
Discoloration
10:50
Page 37
Possible cause
Wrong programme selected.
Lint filter blocked.
Heat exchanger blocked with fluff.
Incorrect amount of washing.
Ventilation slots in base area
covered up.
Residue on inside surface of
drum or drum paddles.
Laundry guard. Additional
functions cannot be selected
after a programme has started.
Too little laundry has been
loaded for the selected
programme, or laundry that is
too dry.
Condensed water container is
full.
Programme time is corrected
automatically depending on
type and volume of laundry and
level of dampness
Fluff filter blocked.
Heat exchanger blocked with fluff.
DELICATE button pressed and
load volume too big.
Load volume too big.
Laundry insufficiently predrained.
Colour fastness of textiles.
what to do if... electrolux 37
Remedy
Select a different programme the
next time you dry (see section
"Overview of programmes").
Clean lint filter.
Clean heat exchanger.
Observe recommended loads.
Uncover ventilation slots in
base area.
Clean inside surface of drum
and drum paddles.
Adjust using the DRYNESS
additional function (see chapter
on 'Drying, selecting additional
functions').
Turn the programme knob to O
OFF. Reset programme.
Select time programme or
higher drying level (e.g.
EXTRA instead of
CUPBOARD).
Empty condensed water
container, then start programme
with the [START/PAUSE] button.
Automatic process, there is no
fault with the appliance.
Clean fluff filter.
Clean heat exchanger.
DELICATE is only suitable for
use with loads of up to 3kg!
Reduce load volume.
Laundry must be adequately
predrained.
Check colour fastness of textiles.
Only treat textiles together if they
are a similar colour.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents