Telnet Interface; Figure 4-28. Starting Telnet Session; Figure 4-29. Main Menu Via Telnet - Comtech EF Data CME-5200 Installation And Operation Manual

CME-5200 Digicast Media Router ASI Receiver
Device Management via User Interfaces
4.4

Telnet Interface

Telnet provides a textual interface over a LAN. Most PCs have the capability to use
Telnet. To use Telnet on a Microsoft Windows
The Run dialog box is shown in Figure 4-28. In the
xxx.xxx.xxx.xxx," where xxx.xxx.xxx.xxx is the IP address of the ASI-R. If the port
number has been modified from the
number must be appended with a colon to the IP address.
The user will be prompted to enter the user name and password to gain access to the
telnet interface.
NOTE
Once the menu is started, press
shown in Figure 4-29:
The user may navigate the menus in the same manner as the Terminal Interface. With
specific exceptions as noted in the Terminal Interface section, the menus available via
Telnet and Serial interfaces are identical.
Standard 23

Figure 4-28. Starting Telnet Session

The default username is
comtech
, both of which are case sensitive.
<ENTER>

Figure 4-29. Main Menu via Telnet

4-20
®
product, click
Open: text window, enter "telnet
via the Terminal Interface, then the port
comtech
and the default password is
and the ASI-R Main Menu will display as
Revision A
MN/MRASIRCDC.IOM
, then .