Changing The Temperature - Bryant Legacy Series Owner's Manual

QUICK START

Changing the temperature

There are times when you want to change the temperature.
Here's how.
1. Open the door.
2. Press the up or down buttons on the right side until you
reach the desired temperature setting. This creates a "tem-
porary hold" until the next pre- - set time period. You will
see temporary hold on the display. (To switch from the
cooling temperature to the heating temperature – or vice
versa – press the mode button on the left until the word
heat or cool is flashing.)
3. To maintain that temperature setting so it doesn't change
during the next pre- - set time period, press the hold/run
button on the left side. The display will show hold. The
temperature will stay at the setting you selected until you
release the hold.
4. To return the temperature to the pre- - set level for that time
period, press hold/run. This releases the hold and the tem-
perature will return to its programmed level.
5. Close the door.
11