Volvo S40 Owner's Manual page 186

2007 Volvo S40
4. Remove the wheel cap (where applicable) using the lug wrench in the tool bag.
5. With the car still on the ground, use the lug wrench to loosen the wheel nuts 1/2 - 1 turn by exerting
downward pressure. Turn the nuts counterclockwise to loosen.
6. There are two jack attachment points on each side of the car. Position the jack correctly in the
attachment (see illustration above) and crank while simultaneously guiding the base of the jack to the
ground. The base of the jack must be flat on a level, firm, non-slippery surface. Before raising the car,
check that the jack is still correctly positioned in the attachment.
7. Raise the vehicle until the wheel to be changed is lifted off the ground.
8. Unscrew the wheel bolts completely and carefully remove the wheel so as not to damage the threads on
the studs.
file:///K|/ownersdocs/2007/2007_S40/07s40_07.htm (20 of 22)12/30/2006 5:44:49 PM