Samsung HG32EA790** Installation Manual page 21

Hotel TV Function
No
Category
11 External Source
12 Bathroom Speaker
13 Eco Solution
14
Logo/Message
15
Cloning
[Hotel-XC]BN68-04282R-00Eng.indd 21
initial value
USB Media
Default
Mode
External Source
ON
Banner
Auto Source OFF
Anynet+ Return
Power On Src
Source
Sub AMP mode 2
Sub AMP
6
volume
Energy Saving Off
Welcome
OFF
message
Edit Welcome
Message
Hospitality
OFF
Logo
Hospitality
-
Logo DL
Logo Display
5 Seconds
Time
Clone TV to
-
USB
Clone USB
-
to TV
Setting Auto
OFF
Initialize
Description
Control Pop-Up menu at USB insert to TV.
Users can set External Source Banner to On or Off.
On : When TV power On or Mode changed, TV will
disply the external source banner.
Off : When TV power On or Mode changed, TV will not
disply the external source banner.
While TV is in power on state, if PC source is connected
to TV, TV will automatically switch to PC mode.
Set the return source after closing Anynet+.
Determines the Sub AMP operation mode.
- 0: Turns the Sub AMP function off (PWM off).
- 1: Determines the Sub volume according to the main
volume control.
That is, the sub volume is determined according to the
Power On Volume, the Min Volume, and the Max
- 2: Determines the volume according to the bathroom
control panel setting.
Sub AMP Volume level at power on initial condition.
This feature adjusts the brightness of the TV in order to
reduce power consumption.
- Off: Turns off the energy saving function.
- Low: Sets the TV to low energy saving mode.
- Medium: Sets the TV to medium energy saving mode.
- High: Sets the TV to high energy saving mode.
- Auto: Sets the TV to automatically energy saving
mode.
Display Welcome Message.
Edit Welcome Message.
Use can set the logo display Off or the type of logo file
(BMP/AVI).
Download the logo file from USB toTV.
Set the logo display time (3/5/7 Seconds).
USB Clone: TV → USB
USB Clone: USB → TV
When Setting Auto Initialize is set to On, and the power
is turned off and on or the Master Power is turned off
and on, the data is restored to the cloned values.
If there is no cloned value, even when the Setting Auto
Initialize is set to On, it will be ignored and the operation
will be the same as that whenSetting Auto Initialize is
set to Off
21
English
2012-03-29 오후 3:03:23